FX400-H1V12,,

FX400-H1V12 400W 12V Power Supply

400W 12V Power Supply
1.Specification:        
Model 12V 400W 15V 400W 24V 400W 48V 400W
Output DC Voltage 12V 15V 24V 48V
Rated Current 33A 26.6A 16.6A 8.3A
Current Range 0~33A 0~26.6A 0~16.6A 0~8.3A
Rated Power 400W 400W 400W 400W
Ripple & Noise (Max.) 150mV 150mV 240mV 300mV
Voltage Tolerancenote ±1% ±1% ±1% ±1%
Setup,Rise Time 80ms/220VAC 50ms/220VAC
Hold Up Time(Typ.) 20ms/220VAC
Iutput Voltage Range 180~264VAC
Frequency Range 47~63Hz
Power Factor(Typ.) PF>0.6/220VAC
Efficiency(Typ.) 0.76 0.8 0.82 0.84
AC Current(Typ.) 4.5A/230VAC
Inrush Curren(Typ.) COLD START 50A/230VAC
Protection Short circuit Protection type : recovers automatically after fault condition is removed
Over load 105~135% hiccup mode , auto-recovery
Over voltage 115%~135% Cut off the output , auto-recovery
Over temperature Rectifier ≥90°C cut off the output , auto-recovery
Fan ON/OFF control ≥55°C Fan start ,≤45°CFan off
Enviroment Working Temp -20°C~ +60°C
Working Humidity 20%~90%RH
Storage Temp/Humidity -40°C~+85°C,10%~90%RH
Safety & EMC Safety Standards CE,ROHS
Withstand Voltage I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
EMC Test Standards EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006
EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006
Note 1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr .
3.Tolerance : includes set up tolerance , line regulation and load regulation .

 

本网站由阿里云提供云计算及安全服务 Powered by CloudDream